Gs 8 L P1 P2 P3 P4 M Fn [Parameter] - Citizen CT-S280 Command Reference Manual

GS ( L pL pH m fn [parameter]

GS 8 L p1 p2 p3 p4 m fn [parameter]

Support model
[Function] Specifying graphics data
[Code] <1D>H<28>H<4C>H<pL><pH><m><fn>
<1D>H<38>H<4C>H<p1><p2><p3><p4><m><fn>
* In the explanation of function, the code of GS ( L is used.
• GS ( L and GS 8 L ) are the same function.
• When [parameter] exceeds 65533 bytes in each function, GS 8 L is used.
[Outline] [The specification which is common to the model]
• Executes the processing related to the graphics data specified by the function code (fn).
fn
0, 48
2, 50
3, 51
64
65
66
67
69
112
• pL, pH specifies the number of bytes or "m" and later to (pL+pH×256).
[Caution] [The specification which is common to the model]
• Frequent use of this command may result in damage of NV memory. Use the Write command to
NV memory in consideration of [10 times max./day] .
• Following the processing of this command, printer Busy may occur during writing data in NV memory. While
the printer is Busy, it stops receiving process. Therefore, data transmission (including real-time command)
from host is prohibited.
CT-S280 CT-S300
CT-S310
CT-S281
Code
GS ( L pL pH m fn
GS ( L pL pH m fn
GS ( L pL pH m fn
GS ( L pL pH m fn d1 d2
GS ( L pL pH m fn d1 d2 d3
GS ( L pL pH m fn kc1 kc2
GS ( L pL pH m fn a kc1 kc2 b xL xH yL
yH [c d1...dk] 1... [c d1...dk] b
GS ( L pL pH m fn kc1 kc2 x y
GS ( L pL pH m fn a bx by c xL xH yL
yH d1...dk
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Function
No.
Function48
Function50
Function51
Function64
Function65
Function66
Function67
Function69
Function 112
- 157 -
BD2-2220 PMU series
CT-P29x series CT-S310 II
Function
Sends NV graphics memory
capacity.
Prints graphics data stored in print
buffer.
Sends the remaining amount of NV
graphics memory.
Sends key code list of defined NV
graphics.
Erases all data of NV graphics in a
lump.
Erases the specified NV graphics data.
Defines raster graphics data to NV
memory.
Prints the specified NV graphics.
Stores raster graphics data to print
buffer.