Paper Detecting Commands; Esc C 3 N - Citizen CT-S280 Command Reference Manual

2.2.8 Paper Detecting Commands

ESC c 3 n

Support model
[Function] Selecting the Paper Sensor valid for a Paper-end signal output
[Code] <1B>H<63>H<33>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• This command selects by which Paper Sensor a Paper-end signal should be output. Each bit for "n" has the
following meaning:
[Caution] [The specification which is common to the model]
• This command is valid only for the parallel interface.
[Default] [The specification which depend on the model]
CT-S280/CT-S281/CT-S300/CT-S310/
BD2-2220/PMU series
n=15
CT-P29x
n=15 (no signal at paper near end due to no paper near end sensor .)
CT-S801/CT-S851/CT-S601/CT-S651
• MSW3-2 OFF: n=15
• MSW3-2 ON : n=12
CT-S280 CT-S300
CT-S310
CT-S281
Bit Position
0
Paper Near-end
1
Paper Near-end
2
Paper-end
3
Paper-end
4 Undefined
5
Undefined
6
Undefined
7
Undefined
series/CT-S301II
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Value
0
Disabled
Disabled
Disabled
Disabled
—
—
—
—
CT-S2000/CT-S4000
- 133 -
BD2-2220 PMU series
CT-P29x series CT-S310 II
1
Enabled
Enabled
Enabled
Enabled
—
—
—
—