Maintenance; Before Each Ride - Dynacraft BALANCE CYCLE Owner's Manual

MAINTENANCE

BEFORE EACH RIDE

Before each ride, check your Balance Cycle and its components against the
following checklist. In addition, if you have a crash or accident, even a minor
one, always inspect the Balance Cycle thoroughly before riding again.
• Check that wheels are straight.
• Check attachment of bolt-on wheels.
• Check handlebar and stem for signs of stress and fatigue.
• Inspect your tires for wear or damage.
• Check the attachment of the handlebar.
• Check the attachment of the seat and seat post.
• Check the wheels to see if they can spin smoothly.
WARNING:
A Balance Cycle that does not work properly can cause you to lose control
and fall. Inspect the entire Balance Cycle thoroughly before every ride and do
not ride it until any problem has been corrected.
• Periodically inspect the Balance Cycle for wear or damage.
• To clean the Balance Cycle, use a mild soap and water solution and clean
cloth. Rinse clean with water to remove soap residue.
• Replace worn handlebar grips.
10