E Maintenance And Inspection - Dynacraft MOUNTAIN BIKE Owner's Manual

MAINTENANCE AND INSPECTION
E
WARNING:
Inspect the bicycle frequently. Failure to inspect the bicycle and to make repairs or adjustments, as necessary, can
result in injury to the rider or to others. Make sure all parts are correctly assembled and adjusted as written in this manual.
• Immediately replace any damaged, missing, or badly worn parts.
• Make sure all fasteners are correctly tightened as written in this manual. Parts that are not tight enough can be lost or operate poorly.
Over tightened parts can be damaged. Make sure any replacement fasteners are the correct size and type.
WARNING:
Have a bicycle service shop make any repairs or adjustments for which you do not have the correct tools or if the
instructions in this manual are not sufficient for you.
WARNING:
Before every ride, it is important to carry out the safety checks detailed on page 11. (For information and
instructions on performing specific equipment checks, locate the relevant section in the manual referenced on pages 5–6).
40