Dynacraft BALANCE CYCLE Owner's Manual page 7

FIGURE 6
STEP 6. Tighten the hex nut on the bolt of handlebar clamp securely
(see Figure 8).
STEP 7. Slide the protective cap down to cover the handlebar clamp
(see Figure 9).
FIGURE 8
WARNING: IMPORTANT NOTE
Test the security of the handlebar by clamping the front wheel between your
knees and trying to move the handlebar up and from side to side. The handle-
bar should not move when applying pressure.
MINIMUM
INSERTION
MARK
FIGURE 7
FIGURE 9
7