Enable/Disable Call Waiting - Aastra 6730i User Manual

Enable/Disable Call Waiting

The call waiting feature notifies the user on an active call, of a new incoming call. You can
disable the call waiting feature, so that the new incoming call is automatically rejected by the
phone with a busy message.
If you disable call waiting on the phone, and the user is on a call, any further incoming calls
receive busy unless "Call Forward Busy" or "Call Forward No Answer and Busy" is
configured on the phone (for more information on
Call Forwarding, see
forwards the call according to the rule configured. The phone can only:
• transfer the currently active call
or
• accept transferred calls if there is no active calls.
If call waiting is disabled:
• intercom calls are treated as regular incoming calls and are rejected.
• pre-dialing with live dial pad disabled still accepts incoming calls.
• the "Incoming Call Interrupts Dialing" parameter is ignored because the incoming call is
automatically rejected (for information on
• the Missed Calls List does not get updated with details of calls.
• the Blind Transfer feature on the phone may not work if two calls are made to the phone at
one time.
You can disable call waiting using the configuration files or the Aastra Web UI.
Enabling/Disabling Call Waiting
Aastra Web UI
Use the following procedure to enable or disable Call Waiting on the IP phone.
156
"Call Forward Account-Based Configuration"
Note:
"Call Waiting" is enabled by default.
on
"Incoming Call Interrupts Dialing"
Model 6730i IP Phone User Guide
page 136.) It then
see page 162).