Bluetooth Radio Time Out Settings; Bluetooth Radio Out Of Range Notifi Cation Settings; Auto Save Last Bluetooth Address - Code Reader 2500 User Manual

1.8.4 - Bluetooth Radio Time Out Settings

Scan the following codes to set the period of time before the Bluetooth Radio will go into sleep mode due to inactivity:
Note: Increasing the time before the reader will time out will decrease battery life.
90 Seconds (Default)
30 Minutes
1.8.5 - Bluetooth Radio Out of Range Notifi cation Settings
Scan the following codes to enable a beep or vibrate notifi cation when the radio goes out of range:
Bluetooth - Out of Range
Beep: On
Bluetooth - Out of Range
Vibrate & Beep: On
Note: This feature may also be utilized to remind users they are carrying a reader and help prevent users from walking
away with a reader Bluetooth radio.

1.8.6 - Auto Save Last Bluetooth Address

If the reader is saved in the proper RF communication mode, enabling this setting will allow the reader to automatically save
the last device to which it was connected, removing the need to scan the save setting after scanning the QuickConnect
code.
Enable Auto Save
Save Settings
5 Minutes 10 Minutes
1 Hour 2 Hours
Bluetooth - Out of Range
Notify with Vibrate: On
Bluetooth - Out of Range
Vibrate and/or Beep: Off (Default)
Disable Auto Save (Default)
15 Minutes
C004386_03_CR2500_User_Manual - 14