Introduction - Strong DVB-T SRT ANT 15 User Manual

Active outdoor antenna

Hide thumbs Also See for DVB-T SRT ANT 15:

PART 1

Engli

1.0 Introduction

Thank you for purchasing the Strong SRT ANT 15 DVB-T Antenna. This antenna has been specially

designed to receive digital terrestrial signals. It can be connected to any Digital Terrestrial Receiver

(DVB-T), and is specially designed for Outdoor use. The antenna housing is UV protected and

weather-proof sealed. With the multi-functional mounting materials supplied you can install the

antenna on a wall, on your balcony or on a pole outside the house.

This DVB-T Antenna is an "Active type" antenna, it has a built-in low noise ampliﬁer that ampliﬁes the

received signal for better performance. The antenna therefore needs 5 V power supplied by your

terrestrial receiver, or by an AC adaptor (supplied with the antenna).

We recommend that you carefully read this user manual before you install the antenna. This will help

you to get the best performance out of your antenna.

Speciﬁcations:

Frequency range:

Gain:

RF Output Impedance:

Power Supply - 2 powering methods:

Special features:

VHF 47 - 230 MHz, UHF 470 - 870 MHz

20 dB for VHF and UHF

75 Ohm

5 V DC 40 mA via ANTENNA connector of the digital

terrestrial receiver or

9 V DC 100 mA via External 230 V AC to DC adapter

Choice of installation methods:

wall-mounted or pole-mounted installation

Built-in VHF and FM ﬁlter

Weather-proof and UV protected housing

Built-in low noise ampliﬁer technology

Highly directional to optimise accurate pointing to the

transmitter and to reduce pick up of unwanted signals

Table of Contents