Advertisement
1.0 INTRODUCTION
Thank you for purchasing the STRONG SRT ANT200 DVB-T/T2 antenna. This antenna has been
specially designed to receive digital terrestrial signals. It can be connected to any Digital Terrestrial
Receiver (DVB-T/ T2) and is specially designed for outdoor use. The antenna housing is weather-proof
sealed. With the supplied multi-functional mounting material, you can install the antenna on any pole
outside the house.
This DVB-T/T2 antenna is an "Active type" antenna; it has a built-in low noise amplifier that amplifies
the received signal for better performance. The antenna therefore needs 5 V power supplied by your
terrestrial receiver, or by an AC/DC adapter (supplied with the antenna).
We recommend that you carefully read this user manual before you install the antenna. This will help
you to get the best performance of your antenna.
Specifications
Frequency range:
Active Antenna Gain:
RF Output Impedance:
Power Supply:
2 powering methods:
Special features:
Choice of installation method: pole-mounted installation
„
Outdoor UHF 18-20dBi TV Antenna for DVB-T/T2 signals reception
„
Compatible with DVB-T/T2 receivers supporting active antenna output (5V)*
„
External 5G/4G LTE filter included for better reception
„
Integrated high gain amplifier for optimal signal strength and performance
„
Low V.S.W.R
„
Compatible with horizontal and vertical polarizations
„
2-way mounting
„
U mounting system, 20 meters RG6 Coaxial cable, 5V inserter for a quick and easy installation
„
Durable and weather resistant
„
Excellent reception also in harsh environment
„
Extremely compact size
„
*In case 5 V is not supported by the receiver, a power adaptor (included) is required.
2.0 PACKAGE CONTENTS
Outdoor TV Antenna with integrated amplifier
1. Mount system
2. 5G/4G Filter SRTANT20
3. Short coax cable
4. IEC type male to F type female fast connector
5. Inserter
6. 20 m Black RG6 coaxial cable with IEC male and F-connector
7. 5V Adapter (USB)
2
UHF 470 ~ 862 MHz
Max. 18-20dBi for UHF
75 Ohm
5 V DC / 45 mA via ANTENNA connector of the digital terrestrial
receiver or
5 V DC / 1 mA via External 230 V AC to DC adapter with power
injector (included)
Fig. 1
Advertisement
