PART 1 • English CoNTENT 1.0 WhAT iS SLiMSAT? 2.0 SAfETy iNSTRUCTioNS 3.0 hoW To iNSTALL? 3.1 Step 1: Where to Install? 3.2 Step 2: Installation 3.3 Step 3: Connecting the Antenna and the Set top box 3.4 Step 4: Fine Tuning and Fixing the Bracket 4.0 TRoUBLEShooTiNg ChECk LiST foR iNiTiAL iNSTALLATioN 5.0 LoSS of SigNAL / RAiN fAdE 6.0 iNSTALLATioN USiNg LoNg CABLE...
SlimSat SA62 with integrated Twin LNB to connect to 1 satellite receiver to connect to 2 satellite receivers SlimSat SA64 with integrated Quad LNB to connect to 4 satellite receivers 2.0 SAfETy iNSTRUCTioNS Before using this product please read this manual carefully and follow exactly all ...
PART 1 • English The cable between the antenna and the Satellite receiver should not exceed 30m as it will decrease the quality of the signal. The use non- isolated jacks will result in a loss of the signal level. ...
PART 1 • English Think about the way you might pass your cable in a discreet way from the SLiMSAT to your Set top Box. The antenna should not be too distant from your satellite receiver; a cable longer than 30 meters can decrease the quality of the signal.
Page 6
PART 1 • English Check 30 3. installation of fixing Bracket A When installing Fixing Bracket A (B3), please consider the place of installation (clamp type, wall mounting type). Make sure that the direction of the bracket is towards satellite. In order to support the weight of the antenna, nut (N1) should be fixed as tightly as possible.
PART 1 • English Wall 3.3 Step 3: Connecting the Antenna and the Set top box Once you have installed the antenna in an open loop space and mounted the way you want it to be the next step is to connect it all together. In order to be able to watch your favourite satellite programs, you need to connect your satellite antenna to a receiver by a cable.
PART 1 • English Once all connections are made, turn on the TV and the satellite receiver, select the Antenna Pointing Menu on your receiver and check the signal level on your TV. Do not forget to choose “LNB: ON”. Someone will need to stay in front of the TV to tell you when the signal is “good”...
PART 1 • English Some after market, off-the-shelf add-on components may not be as advertised. They might not work or could cause additional DC drops and signal amplitude attenuation. Remove such components, go back to the basic connections called out in this manual and re-verify.
Page 11
PART 1 • English No Symbol Part name image Quantity Fix Bracket B Spanner Compass Screw M6x18 SEMS2 Screw M6x50 SEMS2 Round Head Square Neck Bolt M6x50 Round Head Square Neck Bolt M6x75 Flanged Nut M6 31 May 2010 15:16...