Advertisement
1.0 INTRODUCTION - 3.0 SAFTY NOTES
1.0 INTRODUCTION
Thank you for purchasing the Strong SRT ANT 11 DVB-T Antenna. This antenna has been specially
designed to be used to receive digital terrestrial signals from the air. It can be connected to any Digital
Terrestrial Receiver (DVB-T), and is designed for INDOOR use only.
This DVB-T Antenna is a "Active type" antenna, it has an build-in low noise amplifier that amplifies the
received signals for better performance.
We recommend you to carefully read this user manual before you install the antenna, this will help you
to get the best performance out of your antenna.
Specifications:
Frequency range
Gain
RF Output Impedance
Power Supply
Special Features
2.0 PACKAGE CONTENT
1. SRT ANT 11 – Active DVB-T Indoor Antenna
2. Standing unit
3. Coaxial Cable- 2 meter
4. Adaptor
5. User Manual
3.0 SAFETY NOTES
Use only originally supplied accessories.
Before you make any connections: disconnect your equipment from the 230 Volts main power
to avoid electrical shocks during installation.
Short Circuit in the coaxial cable MAY permanently damage your Digital Receiver.
Never install the Antenna outside your house or in humid rooms such as bathrooms.
Never use AC Adaptors with wrong specifications, this MAY permanently damage your antenna
or Digital Receiver. Always check voltages and polarisation of the adaptor before connecting it.
:
VHF 47-230 MHz, UHF 470-870 MHz
:
21dB ± 3dB
:
75 Ohm
:
5 Volts DC 40mA via ANTENNA connector of the
digital terrestrial receiver or
9 Volts DC 100mA via External 230 Volts AC to DC adapter
:
• Build in Low Noise Amplifier technology
• High Directionality: optimised pointing to the transmitter
and reduced pick-up of disturbing signals
Main unit
Standing Unit
Coaxial Cable
Adaptor
3
Advertisement
