Advertisement
PART 1
Engli
sh
l
3. Once you are sure that your receiver supports 5 V antenna power, switch off your receiver and
disconnect it from the 230 V mains power.
4. Take the supplied "long" coaxial cable and connect the end with the "F connector" (screw type
connector) to the antenna. Carefully press the inner lead of the cable into the Female-F connector at
the back of the antenna. Turn the covering nut clockwise with your HANDS until it is fixed.
5. Connect the IEC Male end to your Set Top Box. Normally the input connector on your receiver is
marked as "ANT" (in) or as (in). Refer to the User Manual of your Digital Terrestrial Receiver.
6. Connect your receiver to the 230 V mains power and switch ON your receiver and TV set.
7. Proceed to 5.0 "Antenna installation".
STB or Digital TV
Powering by STB or Digital TV
Indoor
Coaxial Cable
Outdoor
Water-Drop Loop
(recommended)
7
Advertisement
