Related Manuals for Strong SRT ANT 10
Summary of Contents for Strong SRT ANT 10
- Page 2 5.0 INSTALLATION OF THE ANTENNA 1.0 INTRODUCTION Thank you for purchasing the Strong SRT ANT 10 DVB-T Antenna. This antenna has been specially designed to be used to receive digital terrestrial signals from the air. It can be connected to any Digital Terrestrial Receiver (DVB-T), and is designed for INDOOR use only.
-
Page 3: Connecting The Antenna
PART 1 • English Main unit Standing Unit Coaxial Cable 3.0 SAFETY NOTES Use only originally supplied accessories Before you make any connections: disconnect your equipment from the 230 V main power to avoid electrical shocks during installation Short Circuit in the coaxial cable MAY permanently damage your Digital Receiver Never install the Antenna outside your house or in humid rooms such as bathrooms Never use AC Adaptors with wrong specifications, this MAY permanently damage your antenna or Digital Receiver. - Page 4 PART 1 • English (H-Broadcast) antenna mounted H (V-Broadcast) antenna mounted V (Upright) Rear View Digital TV DC Outlet SCART Cable AC/DC Adaptor 230 V wall outlet Coaxial Cable Digital Set Top Box (DVB-T) Standing (Vertical) 5.0 INSTALLATION OF THE ANTENNA INSTALLATION OF THE ANTENNA: 1.
- Page 5 NOTE: It is recommended NOT to place the antenna near to: Devices that are strong source of radiation or interference such as DECT and GSM telephones, Transmitters, Microwaves, etc. Devices with high power consumption such as Electrical Heater, Air conditioner, Hairdryers, etc.
- Page 6 Environmental Issues ENVIRONMENTAL ISSUES STRONG is committed to reducing the impact of its products on the environment. To maximise the benefits of our design enhancements, your co-operation is required. Electronic product recycling Packaging Do not dispose of this product with When disposing of this your domestic rubbish.