Advertisement
User Preferences
Setting Clock
See
the example
below to set the clock to 1:30.
1. Press Q.
2. Enter 1:30
to advance
to 1:30.
3. Press START to accept
or press STOP to reject.
Setting 12 or 24 Hour
Mode
The clock display
mode allows you to choose between
12
and 24 hour mode. The factory
preset clock display
mode is
12 hour.
See the example
below to change the default
mode to 24
hour.
1. Press and hold _(_
for 3 seconds until "12Hr dAy" or
"24Hr dAy" appear
in the display.
2. Press SELF CLEAN to switch between
the 12 and 24 hour
mode.
3. Press START to accept
or press STOP to reject.
Adjusting
Oven
Temperature
User preference
offset
Your appliance
has been factory calibrated
and tested to ensure
an accurate
baking
temperature.
For the first few uses, follow
your recipe times and temperature
recommendations
carefully.
If you
feel
your
oven
is too
hot or too cool
from
your
baking
experience,
the
oven
temperature
may
be adjusted
to your
liking.
The temperature
may be increased
up to +35°F
(+19°C)
or decreased
down
to -35°F
(-19°C]
from
normal.
See the example
below
to increase
the temperature.
1. Press and hold BAKE for 3 seconds until UPO appear
in
the display.
2. Enter the desired temperature
change using the
number pads. SELF CLEAN can be pressed to lower the
temperature.
3. Press START to accept
or press STOP to reject.
Setting Silent Control Operation
The silent control
operation
allows you to control the audio
for the oven control.
You may turn the audio
off: and later
return to operating
with all the normal audible
sounds and
alerts.
See the example
below when changing
the audible
settings.
1. Press and hold DELAY START for 3 seconds until BEEP
appears
in the display.
2. Press SELF CLEAN to switch between
the On and Off
mode.
3. Press START to accept
or press STOP to reject.
Changing
Between
F° or C °
Your control
has the ability
to display
and set Fahrenheit
or
Celsius temperatures.
The factory
preset temperature
display
is Fahrenheit.
See the example
below
to change
the default
temperature
display
to Celsius.
1. Press and hold BROIL for 3 seconds until F or C appear
in the display.
2. Press SELF CLEAN to switch between
the F and C mode.
3. Press START to accept
or press STOP to reject.
Setting 12hr Energy Saving
Mode
The oven control
has a factory
preset built-in
12 hour energy
saving feature
that will shut off: the appliance
if the oven
has been heating
for more than 11 hours and 59 minutes. The
12 hour timer will reset every time the oven door is opened
or anytime
a cooking
function
is set. The oven can be
programmed
to override
this feature
for continuous
baking.
See the example
below to turn off: 12 hour energy saving
mode.
1. Press and hold TIMER for 3 seconds until "12Hr OFF" or
"StAy On" appear
in the display.
2. Press SELF CLEAN to switch between
the "12Hr OFF" or
"StAy On" mode.
3. Press START to accept
or press STOP to reject.
Restoring
Factory
Default
Settings
When new, your appliance
was set with predetermined
oven
control
settings. Over time, the user may make changes to
these default
settings. The following
features
or functions
have user options or adjustments
that may have been
changed
from the factory
default
settings:
° 12 or 24 hour display
mode
° Continuous
bake or 12-Hour Energy Savings mode
° Silent or audible
control
° Oven temperature
display
(Fahrenheit
or Celsius)
° Oven temperature
adjustments
° Aii stored recipes
Please be aware before restoring
to factory
default
settings that ALL of the above user settings wiii be restored,
including
any oven temperature
offset
and any stored recipe
information.
1. Press and hold the 7 numeric keypad
until acceptance
tone sounds (about 3 seconds).
2. Press START. The control wiii reset aii user preference
settings back to factory
default
settings.
29
Advertisement
