Advertisement
Getting Started
Setting Clock at Power Up
You will be prompted
to enter the time of day in the event
of a power failure
or when you first provide
electric
power
to your appliance.
° When your appliance
is first powered
up, 12:00 wiii flash
in the display.
Press CLOCK Q.
Enter the time of day using the numeric
e
key pads and press START to set.
If an invalid time of day is entered,
the control will triple
beep. Re-enter a valid time of day and press START. If
STOP is pressed your dock will start with the time set for
12:00.
Preheat
Temperature
Display
Once a cooking
feature
has been started,
the control
will
display the actual
oven temperature
while preheating.
Once
the
oven
reaches
the
oven
set
temperature,
only
the
oven
set
temperature
will be displayed.
The preheat
temperature
display
is available
with the
following
cooking
modes:
*
Bake
* Conv Bake
° Cakes & Breads
The minimum
temperature
displayed
is 100°F/38°C.
Setting Timer
The timer provided
with the oven control serve as extra
reminders
in the kitchen. When the time runs out the active
timer will beep, and "End" will be displayed.
The following
time settings apply to the timers:
* Min. time: 1 minute
* Max. time: 11 hours 59 minutes
See
example
below to set the timer for 5 minutes:
I.
Press TIMER SET/OFF
2.
Enter 5 minutes
3.
Press START
To cancel
or end the timer, press the TIMER SET/OFF key
again.
NOTE: The timer(s) will not affect
the cooking
process.
Setting Oven
Lockout
The Oven Lockout feature
automatically
locks the oven door
and prevents the oven from being turned on. It does not
disable
the clock, Timer or the interior oven lights.
See example
below
to lock
the oven.
To lock, press and hold OVEN LOCKOUT
for 3 seconds.
To unlock, press and hold OVEN LOCKOUT
for 3 seconds.
DOOR LOCKED will flash in the display
until the door has
finished
locking.
Once the door has been locked the door
loci< indicator
will turn on. DOOR LOCKED will then stay
displayed.
Do not attempt
to open
the oven
door
while
the door
loci<
indicator
is flashing.
To Set Add
| Minute
Feature
The ADD 1 MINUTE
pad is used to set the Add 1 Minute
feature.
When
the pad is pressed, 1 minute is added
to the
Timer feature
if this feature
is already
active.
If the Timer
feature
is not active and the pad is pressed, the Timer
feature
wiii become
active and wiii begin counting
down
from 1 minute.
For further
information on how to set the
Timer feature
see Timer instructions above.
15
Advertisement
