Alarm Icon; Care And Maintenance; Position The Outdoor Transmitter; Wall Mount - La Crosse Technology C86371 Instruction Manual

Hide thumbs Also See for C86371:
Table of Contents

Advertisement

Alarm Icon

Shows when time alarm is active
Does not display when time alarm is deactivated

Care and Maintenance

Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Lithium, Standard, or Rechargeable Batteries
Do not expose the Wireless Forecast Station to extreme temperatures, vibration or shock. Keep dry.
Clean Wireless Forecast Station with a soft damp cloth. Do not use solvents or scouring agents.
The Wireless Forecast Station is not a toy. Keep it out of reach of children.
The Wireless Forecast Station is not to be used for medical purpose or for public information, but is
determined for home use only.
The specifications of this Wireless Forecast Station may change without prior notice.
Improper use or unauthorized opening of housing will void the warranty.
If the Wireless Forecast Station does not work properly, change the batteries and/or check the a/c
cord connection.

Position the Outdoor Transmitter

Wall Mount

The remote temperature transmitter should be mounted vertically to avoid damage.
1. Choose a location for the transmitter that is within range of the Wireless Forecast
Stationand under an overhang for accuracy.
2. Install one mounting screw (not included) into a wall leaving approximately ½ inch
(12.7mm) extended..
3. Place the transmitter onto the screw, using the hanging hole on the backside.
4. Gently pull the transmitter down to lock the screw into place.
Note:
Always ensure that the transmitter locks onto the screw before releasing.
To achieve a true temperature/humidity reading, mount where direct sunlight cannot reach the outdoor
transmitter. Mount the outdoor transmitter on a North-facing wall or in any well shaded area. Under an
eave or deck rail work well. The maximum transmitting range in open air is 200-feet (60 meters).
Obstacles such as walls, windows, stucco, concrete, and large metal objects can reduce the range. Place
the transmitter at least 6 feet in the air to improve signal transmission.
Place both units in their desired location, and wait approximately 1-hour before permanently mounting the
transmitter to ensure that there is proper reception. The outdoor temperature/humidity transmitter is water
resistant, not waterproof and should not be placed anywhere it will become submerged in water or subject
to standing water or snow.

Position the Wireless Forecast Station

1. The Wireless Forecast Stationhas a wide base to sit on a desk or table.
2. Choose a location 6 feet or more from electronics such as cordless phones, gaming systems,
televisions, microwaves, routers etc.
3. Place within range of the outdoor transmitter.
4. The maximum transmitting range in open air is 200-feet (60 meters). Obstacles such as walls,
windows, stucco, concrete, and large metal objects can reduce the range.
5. For best WWVB reception orientate the Wireless Forecast Stationwith the front of the back facing Ft.
Collins Colorado.
La Crosse Technology
Page 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents