Table of Contents BASICS TIME ALARM TEMPERATURE/HUMIDITY Power Up Set Alarm Temperature/Humidity Buttons Activate/Deactivate Alarm Readings Settings Menu Snooze Temperature/Humidty WWVB Atomic Time Records Signal Trend Arrows Forecast Forecast Trend Arrows Adjustable Backlight Comfort Charts ALERTS SENSOR APPENDIX Set Alerts Search for Sensors Stay in Touch Active Alerts...
Enter the Settings Menu to adjust your time. Once the sensor is reading to your thermometer, place the sensor outside in a shaded location. View our sensor mounting video here: bit.ly/th_sensor_mounting Outdoor Sensor Weather Station TX141TH-B C85845 (all versions) BUTTONS...
SETTINGS MENU Hold the button until the display changes to enter the Settings Menu. Press and release the button to adjust values. Press and release to confirm and move to the next item. Press the SNOOZE/BACKLIGHT button at anytime to exit the Settings Menu.
WW VB ATO M IC T I M E SI GN A L • The station will automatically search for the atomic time signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00. • The Atomic Time Signal Icon will flash while searching, and be solid when connected.
Snooze: • When alarm sounds, press the SNOOZE/BACKLIGHT button to silence alarm for 10 minutes. The Snooze Icon will flash. • Press any button except SNOOZE/BACKLIGHT to silence the alarm for 24 hours. • This is a crescendo alarm. It will sound for two minutes with increased frequency, then shut off if no buttons are pressed.
A DJU STA B L E B ACK L IG H T When operating with the power cable, the backlight is adjustable to: High, Low, or Off. Press and release the SNOOZE/BACKLIGHT button to adjust backlight. When operating on batteries only, the backlight will come on briefly when the SNOOZE/BACKLIGHT button is pressed.
TEMPERATURE & HUMIDITY READINGS 1. TEMPERATURE ALERT 2. TREND ARROW 3. OUTDOOR TEMPERATURE Indicates rising and falling Shows an Alert is armed. Current Outdoor Temperature trends. Temperature. 5. OUTDOOR HUMIDITY 6. TREND ARROW 4. RECEPTION ICON Current Outdoor Humidity. Indicates rising and falling Indicates if the station is Humidity trends.
TEMPERATURE & HUMIDITY RECORDS All HI/LO temperature/humidity records reset automatically at 12:00 (midnight). • Press and release the TEMP button once to view HI indoor and outdoor temperature/ humidity records. • Press and release the TEMP button a second time to view LO indoor and outdoor temperature/humidity records.
TE M P E R AT UR E & H U M ID I T Y A L ERTS To set alerts: Hold the ALERTS button to enter alert set mode. Outdoor HI ALERT OFF will show. To set this alert value, press and release the button to arm this alert (ON).
S E A R C H F O R O UT D O O R S E N S OR If you are seeing dashes for any sensor readings, please try the following steps: Hold the TEMP button to search for your outdoor sensor. The Reception Indicator will begin to animate.
STAY IN TOUCH! Ask questions, watch setup videos, and provide feedback on our social media outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram. S P EC I F I CAT I ON S C85845 (all versions): Temperature Range: 32°F to 122°F (0°C to 50°C)
S P E CI F I CAT I ON S TX141TH-B (all versions) Temperature Range: -40°F to 140°F (-40°C to 60°C) Transmission Range: over 330 feet (100 meters) in open air RF 433MHz Power Requirements: 2 “AA” LR6 Batteries (not included) Battery Life: Over 24 months with reputable batteries CARE AND MAINTENANCE When batteries of different brand or type are used together, or new and old batteries are used...
For more information, go to: www.P65Warnings.gov WARRANTY & PATENTS La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601 For Full Warranty Details, Visit: www.lacrossetechnology.com/support...
F C C STAT EM EN T This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the C85845 and is the answer not in the manual?
Questions and answers