Test - Lucent Technologies Voice Terminal 8403 User Manual

To change from handset to
speaker
To end a call while the
speaker is active

Test

To test the voice terminal
lights
1
While handset is off-hook, press
Red lights next to
You can now hang up handset and call will remain active
on the speaker. However, in order to talk to other party,
you must use the handset again.
1
With handset on-hook, press
Red lights next to
1
Press and hold down
Green light next to
Note: If the green light next to
goes on steadily, it means the voice terminal is not
communicating with the DEFINITY switch or with
System 75. In such a case, see your system manager.
The lights on your voice terminal go on
2
To end test, release
The lights return to normal operation
Green light next to
time
Note: If the lights do not respond during test, notify your
system manager.
You can test the tone ringer on your voice terminal by
pressing either side of the Volume control button when the
handset is on-hook and the speaker is off.
Speaker
Speaker and Mute
Speaker
Speaker and Mute
Test
Test
goes on
Test flashes rather than
Test
Test goes off after a short period of
go on
go off
21