Advertisement
Low Priority QoS Queue Configuration
21. Select Advanced > Quality of Service > Queue Config.
22. Click the Add button.
23. Enter a name of 15 characters or less to reflect the device will use low priority QoS – eg. PC2LowPriority.
24. Set Enable to "Enable".
25. Set the Interface (Australian customers use atm0(0_8_35), NZ customers use atm0(0_0_100)).
26. Enter a Precedence. For the lowest priority set it to 3. For the highest priority use 1.
27. Set the DSL Latency as Path0.
28. Click the Apply/Save button.
Advertisement
