Advertisement
56. Enter a Destination MAC Address if the connection is to a single device. This is useful for VPN connections.
If you wish the destination MAC address to be any address leave the field blank.
57. Enter a Destination IP Address if the connection is to a single device. This is useful for VPN connections. If
you wish the destination IP address to be any address leave the field blank.
58. Enter a Destination Subnet Mask if you have entered a Destination MAC address and Destination IP
address. This would normally be 255.255.255.0 unless your system administrator advises otherwise. If you
have not entered a Destination MAC or IP address leave the field blank.
59. Set the Differentiated Service Code Point (DSCP) Check to AF11(001010).
60. Set the Protocol to TCP. Other options include UDP, ICMP or IGMP.
61. Set "Assign Classification Queue" to Priority 3 (in the example above pppoa0&atm0&Path0&Key39&Pre3).
Other options are priority 1 and 2. Priority 1 gives the highest priority with priority 3 being the lowest.
62. Set Mark Differentiated Service Code Point (DSCP) as AF11(001010).
63. Set Mark 802.1p Priority as 0. In the scale 0-7, 0 is best effort, 6 and 7 are reserved for networking
performance so set 0 as the lowest priority.
64. Click the Apply/Save button.
65. You now have 2 Quality of Service rules implemented for 2 devices connecting to the NB604 router.
66. Select Management > Reboot. Click the Reboot button to restart the router and save the new settings.
67. To test your Quality of Service settings try running speed-tests (
pcs/devices simultaneously.
http://speedtest.net
) on both
Advertisement
