CTEK MXTS 40 Manual page 4

ChARGING
for best possible charging of your batteries the voltage and current is
adjustable. in addition temperature compensated charging is selectable.
See below how to set the parameters for customized charging.
1. Connect the charger cables to the charger
(see quickguide).
2. Connect the charger to the battery
(see quickguide).
3. Connect the charger to the mains supply
4. Turn on the mains switch
The power lamp will indicate that the mains cable is connected to the
mains supply. The error lamp will indicate if the battery clamps are
incorrectly connected. The reverse polarity protection will ensure that
the battery or charger will not be damaged.
5. Press the MODE-button to select charging program
6. Press SET-button to set parameters
7. Select voltage
•Display (h) will indicate that voltage ( V ) is selectable.
•Display (v) will flash and indicate set voltage.
•press +/- to change.
•press SET-button to confirm.
8. Select current
•Display (Ah & info) will indicate that current ( A ) is selectable.
•Display (A) will flash and indicate set current.
•press +/- to change.
•press SET-button to confirm.
9. Select temperature compensation
• D isplay (h) will indicate that temperature compensation ( T ) is
selectable.
•Display (Ah & info) will indicate On / Off.
•press +/- to change.
•press SET-button to confirm.
10. Press the START/STOP-button to start charging cycle
or press MODE-button to change charging program
11. Follow the 8-step display through the charging
process
The battery is ready to start the engine when STEp 4 is lit. The battery
is fully charged when STEp 7 is lit.
12. Stop charging at any time by pressing the
START/STOP-button
13. Press START/STOP-button to start charging cycle
6 • EN
DISPLAY (V)
DISPLAY (h)
SET-BUTTON
DECREASE BUTTON
NORMAL PROGRAM
AGM PROGRAM
Ca/Ca PROGRAM
BOOST PROGRAM
SUPPLY PROGRAM
ERROR LAMP
POWER LAMP
MXTS 40
12V/40A
24V/20A
1 2 3 4 5 6 7 8
12V 40A
0.00h 0Ah
SET
NORMAL
MODE
AGM
Ca/Ca
BOOST
START
STOP STOP
SUPPLY
DISPLAY (A)
DISPLAY (Ah & info)
INCREASE BUTTON
MODE-BUTTON
START/STOP-BUTTON
REVERSED POLARITY
BATTERY TEMPERATURE
OUT OF RANGE
OVERVOLTAGE ERROR