Advertisement
MANUAL
CONGRATULATIONS
to the purchase of your new professional switch mode battery charger. This
charger is included in a series of professional chargers from CTEK SWEDEN AB
and represents the latest technology in battery charging. MXTS 70 is the first
charger with multiple adjustable parameters.
Battery cable
Battery cable
female connector +
Temperature sensor
male connector
Battery cable
female connector -
Mains cable
20015126D Manual MXTS70, All languages, Print file 003.indd 3
Temperature sensor
Charger cable
male connector +/-
Temperature sensor female connector
Mains cable connector
Clamps
Eyelets M8
QUICK GUIDE
To charge, with last used program settings
4
Press START/PAUSE-button
to start charging
Press the START/PAUSE-
button to interrupt
charging
1
Attach the cables
to the charger.
Connect
the charger
2
to mains supply
Connect the charger
to the battery
WARNING!
Batteries and electronics will be damaged if 12V batteries
are charged in 24V-setting.
3
EN • 3
2011-10-11 13:01:26
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CTEK MXTS 70
Summary of Contents for CTEK MXTS 70
- Page 1 This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. MXTS 70 is the first charger with multiple adjustable parameters.
- Page 2 ChARGING For best possible charging of your batteries the voltage and current is adjustable. In addition to that temperature compensated charging is MXTS 70 selectable. See below how to set the parameters for customized charging. 12V/70A 1. Connect the charger cables to the charger...
-
Page 3: Indication Lamps
12V/70A 24V/35A INDICATION LAMPS, DISPLAyS AND ERRORCODES MXTS 70 12/24 10-70 12V/70A 24V/35A MXTS 70 12V/70A E01-E99 MXTS 70 START MODE 24V/35A PAUSE 12V/70A Ah & info Ah & info 24V/35A MXTS 70 NORMAL Ca/Ca SUPPLY INDICATION LAMPS: POWER SETTINGS BEFORE START:... -
Page 4: Charging Programs
ChARGING PROGRAMS CONNECT ThE CABLES Choose program by pressing the MODE-button. If the battery clamps are incorrectly connected, the reverse polarity protec- Adjust parameters according to "CHARGING" (6–8). tion will ensure that the battery and charger are not damaged. Press START/PAUSE button to start the selected program. 1. -
Page 5: Ready To Use
ChARGING PROGRAMS MOUNTING When permanently mounting the charger, mount the charger on a firm DESULPHATION SOFT START BULK ABSORPTION ANALYSE RECOND FLOAT PULSE surface. Fix the charger with screws in the four holes. Use screws intended for the surface. Allow space around the charger to not interfere with air cooling. VOLTAGE (V) CURRENT (A) 15.8V... -
Page 6: Technical Specification
VIKMANSHYTTAN, SWEDEN 2011-09-01 battery. CTEK battery chargers produce very clean voltage and current with low ripple. charger safely. Store and use the battery charger out of the reach of children, and ensure that children cannot play with the charger.
Need help?
Do you have a question about the MXTS 70 and is the answer not in the manual?
Questions and answers