Troubleshooting - Clarion CMS1 Owner's Manual & Installation Manual

6. TROUBLESHOOTING
No sound
The commander is
not responding
Auto seek function
can not find any
stations
10
CMS1
The vessel's accessory
switch is not on
The fuse is blown
Volume is set too low
Wiring is not properly
connected
The built-in internal
processor is not operating
properly
The antenna cable is not
connected
The signals are too weak
If the power supply is properly connected
to the vessel's accessory terminal,
switch the ignition key to "ACC"
Replace the fuse
Increase the volume to audible level
Correct wiring connections
Press the RESET button with a ball point pen
RESET
Insert the antenna cable securely
Select a station manually