Radio (Am/Fm) Operation; Weather Band Operation - Clarion CMS1 Owner's Manual & Installation Manual

Radio (AM/FM) Operation
[.]
[~]
Tuning Down, Tuning Up Buttons
1. Auto Seek tuning Up/Down:
Press this button less than 2 seconds to
automatically seek the next strong section.
2. Manual Tuning Up and Down:
Press and hold this button more than
2 seconds to seek stations down step
by step.
[ENTER] Button
Press this button to confirm the operation.
[OP] Option Button
Radio Mode Options:
CNormal~Auto
Store-Manu Store
J
1. Auto Store: Press OPTION button to access
Auto Store, then press ENTER button to
automatically select six strong stations and
store them into six presets. The new stations
replace any stations already stored in the band.
The unit will pause for 5 seconds at each
preset station after Auto Store is completed.
Weather Band Operation
[~ ] Tuning Up Button
1. Press and hold this button more than 2 sec's,
to seek the available among all 7 weather
. band stations step by step.
[.] Tuning Down Button
1. Press and hold this button more than 2 sec's,
to seek the available stations among all 7
weather band stations step by step.
[ENTER] Button
Press this button to confirm the operation.
2. Manu Store: Select a station that you want
to store. Press OPTION button to access
Manual Store. Press ENTER button to go into
manual store interface. The preset number is
flashing. Press up or down key to select a
preset number. Press ENTER button again to
store current station into preset.
[.] [...] Search Up, Search Down Buttons
1. Recall Preset Down: P6-P5-P4- .... P1
2. Recall Preset Up: P1-P2-.... P5-P6
Area set
This option allows you to select the appropriate
frequency spacing for your area.
1. Press and hold the [MUTE] and [ADJUST]
buttons at the same time for more than 2
seconds to get into the world tuner frequency
/region setting.
2. Use [.] or
[~]
button to select the region.
Press [ENTER] to confirm the selection.
NOTE: Default is USA frequency. Once the
region is changed, all the stations in the preset
memory will be erased.
[OP] Option Button
WB Mode options:
r
Normal~
Scan
1
1. Scan: the unit will pause for 5 sec's at each
strong station circularly, press ENTER button
to stop scan function.
CMS1
7