Let's Talk Technical - Vax Air3 Pet Plus VRS114 Let's Get Started

Let's talk technical

IMPORTANT: Any obstruction or blockage will automatically stop the brushbar rotating.
Removing debris from brushbar
A RED light will indicate
a jammed brushbar.
Stand the vacuum cleaner in the
upright position. The brushbar
should automatically reset.
Changing the brushbar/advanced brushbar cleaning
Using a crosshead screwdriver,
remove 3 screws from the belt
cover on the side of the floorhead.
Lift and separate
brushbar side cover.
Using a pair of scissors, cut any
hair or debris free from around
the brushbar.
A GREEN light indicates no
blockages in the brushbar.
Pull to remove the belt cover.
Pull brushbar through
brushbar side cover
to remove.
Pull to remove the brushbar
location plate. Remove belt.
Using a pair of scissors cut any
hair or thread free, remove any
dirt or debris from brushbar.
TIP