Table of Contents
Advertisement
Quick Links
User Guide
Vax Careline: AU: 1300 361 505
NZ: 0800 800 900
Bagged Cylinder
Get Cleaning...
What ' s your Vax ' s model number?
V
B
G
S
P
1
8
5
0
What ' s your serial number?
(Located on the base of the machine)
Note these down in case you need them in future. Please keep instructions for further use.
vax.com.au
VBGSP1850
Advertisement
Table of Contents
Related Manuals for Vax Silentium Plus VBGSP1850
Summary of Contents for Vax Silentium Plus VBGSP1850
- Page 1 NZ: 0800 800 900 Bagged Cylinder Get Cleaning... What ’ s your Vax ’ s model number? What ’ s your serial number? (Located on the base of the machine) Note these down in case you need them in future. Please keep instructions for further use.
- Page 2 Vax Service line: AU: 1300 361 505 NZ: 0800 800 900...
-
Page 3: Machine Overview
16 2-in-1 dusting brush/upholstery tool (1pc tted, 2pc loose) 17 Crevice tool 20 Telescopic extention tube 23 Post motor lter (Located behind the exhaust lter cover) 18 Large turbo tool 21 Hard oor tool vax.com.au... -
Page 4: General Safety Information
IMPORTANT: If the inlet, hose or telescopic tube is blocked, 6. Use only as described in this manual. Use only Vax switch off the vacuum cleaner and remove the blockage(s) recommended attachments. -
Page 5: Operation
Operation Keep your Vax like new IMPORTANT: The condition of the filters affects the performance of your machine. Please check and clean filters periodically (depending on the level of use). For full cleaning instructions, see Maintenance. IMPORTANT: Do not use the vacuum cleaner without all of the filters and dust bag in place. -
Page 6: Operating The Appliance
The 2-in-1 dusting brush/ return button. floor tool parking slot. upholstery tool and crevice tool are located onboard the vacuum cleaner. Press the tool compartment release button to access. Vax Service line: AU: 1300 361 505 NZ: 0800 800 900... -
Page 7: Maintenance
Maintenance (Keep your Vax as good as new) Emptying the dust bag Use the lid release button to lift the Slide the dust bag to remove from Discard dusting bag. vacuum cleaner cover. the dust bag holder. Cleaning the pre-motor filter WARNING: Water temperature should be a maximum of 40ºC when washing filters. -
Page 8: Cleaning The Post-Motor Filter
Maintenance (Keep your Vax as good as new) Cleaning the post-motor filter WARNING: Do not wash the post-motor filter. Remove post motor filter from exhaust filter cover. Tap and remove any excess debris and dirt. Clearing blockages WARNING: to reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks. - Page 9 The electrical outlet may not be working properly; check the fuse or breaker, or consult an electrician. The motor thermostat may have tripped; switch off and unplug the vacuum cleaner, and leave for one hour before switching the cleaner back on. vax.com.au...
-
Page 10: Other Information
8.30am to 5.00pm If you have queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. - Page 11 Notes vax.com.au...
- Page 12 Distributed by Techtronic Industries Pty. Ltd. Level 1, 660 Doncaster Road, Doncaster, Australia 3108. www.vax.com.au Service Line: AU: 1300 361 505 / NZ: 0800 800 900...