Mitsubishi Diamond Plus 93SB Service Manual page 73

g. Check the serial number of the set and enter an input of the following code from the keyboard.
08109710 Serial Number (Model Code + 1 Space + Serial No.)
Example: 08109716 2450001YB
h. Press the Enter key. Then, the EDID data, OSM model name, and the serial number begin to be
written in.
i. Display "MONITOR INFO." of the OSM, and confirm that the model name and serial number have been
correctly written.
j. Press the F2 key to start the inspection of DDC2B.
After the completion of inspection, the contents of EDID are displayed. If an error should occur, the related
error message will be displayed in the bottom area of the screen. Refer to Paragraph 7.5 in regard to the
meaning of this error message.
5-31