4.20 LCD Module
Removing the LCD Module
To remove the LCD module, follow the steps below and refer to Figure 4-41.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory module, optional PCMCIA card,
display mask, and FL inverter board as described in Sections 4.2, 4.3, 4.4, 4.17
and 4.18 (DSTN display) or 4.19 (TFT display).
3.
Remove four M2.5x6 screws securing the LCD module to the LCD cover.
4.
Carefully rotate the LCD module from right to left out of the display cover and
disconnect the LCD flexible cable from CN1 on the LCD module.
Figure 4-41 Removing the LCD module (TFT LCD module)
700 Series
4-47