Toshiba Tecra 700CS Maintenance Manual page 111

If the changed item requires the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
(a) To make other changes, press N, then repeat the steps above.
(b) To accept the changes, press Y. The system will reboot automatically.
NOTE: You can press Esc to quit at any time without saving changes.
Before exiting the SETUP window, the system will ask you to confirm that
you don't want to save your changes.
3.25.5 The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press Home.
2. To accept the default settings, press End and then press Y.
NOTE: When you execute the default setting, the following settings are not
changed:
3.25.6 SETUP Options
The SETUP screen is divided into functionally related groups. This section describes each
group and its options.
1. Memory
This option lists the computer's memory allocation.
(a) Total
Displays the total amount of memory installed and is automatically
calculated by the computer. You cannot change this value.
700 Series
HDD Mode
Password
Sound System: I/O Address, Interrupt Level, DMA
Write Policy
3-57