Procedure 5; Check 2 - Toshiba Tecra 700CS Maintenance Manual

Procedure 5

Replacement Check
The power supply board or system board may be disconnected or damaged. Disassemble the
computer following the steps described in Chapter 4, Replacement Procedures, and check the
connections between the power supply board and system board. If the boards are properly
connected, perform the following check(s):
Check 1 Replace the power supply board with a new one. If the power supply is still not
functioning properly, perform Check 2.

Check 2

Replace the system board with a new one.
700 Series
2-11