Toshiba Tecra 700CS Maintenance Manual page 117

(3) DMA (Direct Memory Access) channel
7. Battery
This option selects the BATTERY SAVE OPTION. Selections include Full
Power, Low Power, and User Setting.
Full Power
Low Power
User Setting
700 Series
Use this option to set the DMA channel. The available settings
are:
Channel 0
Channel 1 (Default)
Channel 3
The following shows the full power settings.
COM/PCMCIA/PRT
Procesing Speed
CPU Sleep Mode
Display Auto Off
HDD Auto Off
System Auto Off
LCD Brightness
Cooling method
The following shows the low power settings.
COM/PCMCIA/PRT
Procesing Speed
CPU Sleep Mode
Display Auto Off
HDD Auto Off
System Auto Off
LCD Brightness
Cooling method
NOTE: In boot mode, the System Auto Off message does not
appear.
This option allows you to set the battery save param-
eters on the subwindow, BATTERY SAVE OP-
TIONS. When you select this option, the automatic
setting feature (Full Power or Low Power) is disabled
and the user-preferred parameters become effective.
The default setting in the subwindows depends on the
Battery Save Mode: Low Power (Long Life) or Full
Power (Normal Life). For details, see Battery Save
Options below.
= High
= Disabled
= Disabled (700CS)
30 Min. (700CT)
= Disabled
= Disabled
= Bright
= Performance
= Low
= Enabled
= 03 Min.
= 03 Min.
= 30 Min.
= Semi-bright
= Quiet
3-63