Adjusting The Exposure (Density) - Canon SmartBase MPC190 Quick Reference Manual

Adjusting the exposure (density)

Adjusting the exposure (density) Adjusting the exposure (density) Adjusting the exposure (density)
Exposure (density) is the degree of difference between light and dark. A high exposure
setting will make blacks darker and whites brighter, whereas a low exposure setting will
make the differences between black and white less marked.
Refer to Making copies on p. 5-1 and in step 3, adjust the exposure as follows:
1 1 1 1
Press [Menu] three times. Press [Menu] three times. Press [Menu] three times. Press [Menu] three times.
D
3 . D E N S I T Y
- L T
2 2 2 2
Use [O] or [ Use [ ] or [P P P P ] to select the exposure.
Use [ Use [ ] or [ ] or [
3 3 3 3
Press [OK]. Press [OK].
Press [OK]. Press [OK].
Chapter 5
D K +
] to select the exposure.
] to select the exposure. ] to select the exposure.
Copying—Basic operation
5 5 5 5
5-3 5-3 5-3 5-3