Table of Contents
Advertisement
l When you click a button on the Toolbar, another application opens.
When you click a button on the Toolbar, another application opens.
When you click a button on the Toolbar, another application opens.
When you click a button on the Toolbar, another application opens.
When you click a button on the Toolbar, you want another application to open.
When you click a button on the Toolbar, you want another application to open.
When you click a button on the Toolbar, you want another application to open.
When you click a button on the Toolbar, you want another application to open.
1. 1. 1. 1.
Set the application you want to open in Link To in the Toolbar Settings dialogue box
Set the application you want to open in Link To in the Toolbar Settings dialogue box
Set the application you want to open in Link To in the Toolbar Settings dialogue box
Set the application you want to open in Link To in the Toolbar Settings dialogue box
( ( ( ( 1 Software Guide
Software Guide
Software Guide ). ). ). ).
Software Guide
l The image you have scanned looks dirty.
The image you have scanned looks dirty.
The image you have scanned looks dirty.
The image you have scanned looks dirty.
1. 1. 1. 1.
If the image looks grainy, increase the scan resolution (
If the image looks grainy, increase the scan resolution (1 Software Guide
If the image looks grainy, increase the scan resolution (
If the image looks grainy, increase the scan resolution (
2. 2. 2. 2.
Display the image at 100%.
Display the image at 100%.
Display the image at 100%.
Display the image at 100%.
Some applications do not display an image well at small sizes. Try displaying the image at 100%
magnification.
3. 3. 3. 3.
There is moiré when you scan printed material.
There is moiré when you scan printed material.
There is moiré when you scan printed material.
There is moiré when you scan printed material.
In ScanGear, click [Descreen] (1 Software Guide ).
4. 4. 4. 4.
Set the monitor display colours to 16-bit or higher.
Set the monitor display colours to 16-bit or higher.
Set the monitor display colours to 16-bit or higher.
Set the monitor display colours to 16-bit or higher.
In Display Properties, set the display colours to 16-bit colour, 24-bit colour, or higher.
Clean the platen glass and document cover (1 Basic Guide
5. 5. 5. 5.
Clean the platen glass and document cover (
Clean the platen glass and document cover (
Clean the platen glass and document cover (
l White margins appear around the scanned image.
White margins appear around the scanned image.
White margins appear around the scanned image.
White margins appear around the scanned image.
1. 1. 1. 1.
Specify the scan area.
Specify the scan area.
Specify the scan area.
Specify the scan area.
In ScanGear, click [Multi-Photo Scan] to automatically specify the scan area.
If there are white margins around documents such as photographs, or if you want to trim a
document (i.e. you want to scan only one part of a document), specify the area of the scan
manually (1 Software Guide ).
To display ScanGear when scanning: On the Windows desktop, on the Toolbar, click [Settings].
Click [Show scanner driver before scanning] (1 Software Guide ).
2. 2. 2. 2.
When you do not want to display ScanGear
When you do not want to display ScanGear
When you do not want to display ScanGear
When you do not want to display ScanGear
Even if you do not want to display ScanGear, you can make a scan at the paper size specified
and the area outside the paper size will not be scanned. Do the following:
On the Windows desktop, on the Toolbar, click [Settings]. In the Toolbar Settings dialogue box,
in the tab for the button used to scan, specify the paper size (1 Software Guide ).
l White lines appear on the left side of the image.
White lines appear on the left side of the image.
White lines appear on the left side of the image.
White lines appear on the left side of the image.
1. 1. 1. 1.
Place the document so that it is completely on the platen glass and is approximately 3 mm
Place the document so that it is completely on the platen glass and is approximately 3 mm
Place the document so that it is completely on the platen glass and is approximately 3 mm
Place the document so that it is completely on the platen glass and is approximately 3 mm
1 1 1 1
⁄ ⁄ ⁄ ⁄
( ( ( (
inch) away from the top and left edges of the platen glass.
inch) away from the top and left edges of the platen glass.
inch) away from the top and left edges of the platen glass.
inch) away from the top and left edges of the platen glass.
8 8 8 8
8-10
8-10
8-10
8-10
Troubleshooting
Software Guide ). ). ). ).
Software Guide
Software Guide
Basic Guide ). ). ). ).
Basic Guide
Basic Guide
Chapter 8
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
