Canon SmartBase MPC190 Quick Reference Manual page 67

l Cannot scan multiple photographs correctly. Cannot scan multiple photographs correctly.
Cannot scan multiple photographs correctly. Cannot scan multiple photographs correctly.
1. 1. 1. 1. Does the position of the photographs and the way they are positioned fulfil the following Does the position of the photographs and the way they are positioned fulfil the following
Does the position of the photographs and the way they are positioned fulfil the following Does the position of the photographs and the way they are positioned fulfil the following
requirements? requirements? requirements? requirements?
• There should be a gap of at least 1 cm (
photographs.
• There should be a gap of at least 1 cm (
• There should be no more than ten photographs.
• The photographs should be straight (any tilting should be kept within 10 degrees).
2. 2. 2. 2. Some applications do not accept multiple scans of more than two images. Some applications do not accept multiple scans of more than two images.
Some applications do not accept multiple scans of more than two images. Some applications do not accept multiple scans of more than two images.
Check the application's documentation or contact the application's manufacturer.
3. 3. 3. 3. Clean the platen glass and document cover ( Clean the platen glass and document cover (1 Basic Guide Clean the platen glass and document cover ( Clean the platen glass and document cover (
4. 4. 4. 4. Thick or curled photographs may not be scanned properly. Thick or curled photographs may not be scanned properly.
Thick or curled photographs may not be scanned properly. Thick or curled photographs may not be scanned properly.
Press lightly on the document cover when scanning.
l Scanned image is displayed at a large (small) size on the computer Scanned image is displayed at a large (small) size on the computer
Scanned image is displayed at a large (small) size on the computer Scanned image is displayed at a large (small) size on the computer
screen. screen.
screen. screen.
1. 1. 1. 1. Enlarge or reduce the image display in the application. Enlarge or reduce the image display in the application. Enlarge or reduce the image display in the application. Enlarge or reduce the image display in the application.
However, if you open the image in Paint or Imaging, it may display at a large size and you will
not be able to reduce it. Open it in the MultiPASS Viewer (1 p. 3-3).
2. 2. 2. 2. Change the resolution in ScanGear and try scanning again. Change the resolution in ScanGear and try scanning again. Change the resolution in ScanGear and try scanning again. Change the resolution in ScanGear and try scanning again.
The image will be large if resolution is high. It will be small if resolution is low (1 Software
Guide ).
Chapter 8
3 ⁄
inch) between the edge of the platen glass and
8
3 ⁄
inch) between the edges of the photographs.
8
Basic Guide ). ). ). ). Basic Guide Basic Guide
Troubleshooting
8 8 8 8
8-11 8-11 8-11 8-11