Kyocera FS-C2026MFP Service Manual page 114

Code Contents
0180 Machine number mismatch
Machine number of main and
engine does not match.
0600 Expanded memory (DIMM)
installing error
The expansion memory mod-
ules (DIMM) are not correctly
mounted.
0610 Expanded memory (DIMM)
error
The expansion memory mod-
ules (DIMM) mounted on the
main PWB does not operate
correctly.
0640 Hard disk error
The hard disk cannot be
accessed.
0830 FAX control PWB flash pro-
gram area checksum error
A checksum error occurred
with the program of the FAX
control PWB.
0840 Faults of RTC
The time is judged to go back
based on the comparison of
the RTC time and the current
time or five years or more
have passed.
0870 FAX control PWB to main
PWB high capacity data
transfer error
High-capacity data transfer
between the FAX control PWB
and the main PWB of the
machine was not normally
performed even if the data
transfer was retried the speci-
fied times.
0920 Fax file system error
The backup data is not
retained for file system abnor-
mality of flash memory of the
FAX control PWB.
Causes
Data damage of Contact the Service Administrative Division.
EEPROM.
Improper installa- Check the installation of the expanded mem-
tion expanded ory (DIMM).
memory (DIMM).
Defective Replace the expanded memory (DIMM) and
expanded memory check for correct operation (see page 1-2-8).
(DIMM).
Defective main Replace the main PWB and check for cor-
PWB. rect operation (see page 1-5-29).
Defective hard Replace the hard disk and check for correct
disk. operation.
Defective main Replace the main PWB and check for cor-
PWB. rect operation (see page 1-5-29).
Defective FAX soft- Install the fax software.
ware.
Defective FAX con- Replace the FAX control PWB (see page 1-
trol PWB. 5-35).
The battery is dis- Check visually and remedy if necessary
connected from the
main PWB.
Defective main Replace the main PWB and check for cor-
PWB. rect operation (see page 1-5-29).
Improper installa- Reinstall the FAX control PWB (see page 1-
tion FAX control 5-35).
PWB.
Defective FAX con- Replace the FAX control PWB or main PWB
trol PWB or main and check for correct operation (see page 1-
PWB. 5-35 or 1-5-29).
Defective FAX con- Replace the FAX control PWB and check for
trol PWB. correct operation (see page 1-5-35).
1-4-8
Check procedures/
corrective measures
2KW/2KX