Panasonic aj-HPX2000p Operating Instructions Manual page 148

Items/ Adjustable
Data Saved Range
R(PHASE) –63
:
+00
:
S C U F R +63
R-Mg(PHASE) –63
:
+00
:
S C U F R +63
Mg(PHASE) –63
:
+00
:
S C U F R +63
Mg-B(PHASE) –63
:
+00
:
S C U F R +63
B(PHASE)
–63
:
+00
:
S C U F R +63
B-Cy(PHASE) –63
:
+00
:
+63
S C U F R
Cy(PHASE) –63
:
+00
:
+63
S C U F R
Cy-G(PHASE) –63
:
+00
:
+63
S C U F R
G(PHASE) –63
:
+00
:
S C U F R +63
G-Yl(PHASE) –63
:
+00
:
S C U F R +63
Yl(PHASE) –63
:
+00
:
S C U F R +63
Yl-R(PHASE) –63
:
+00
:
S C U F R +63
COLOR ON
CORRECT OFF
S C U F R
The ____ in the Adjustable Range column indicates the
preset mode.
148 Menu : Menu Description Tables
Remarks
For performing the hue correction for
red.
For performing the hue correction
between red and magenta.
For performing the hue correction for
magenta.
For performing the hue correction
between magenta and blue.
For performing the hue correction for
blue.
For performing the hue correction
between blue and cyan.
For performing the hue correction for
cyan.
For performing the hue correction
between cyan and green.
For performing the hue correction for
green.
For performing the hue correction
between green and yellow.
For performing the hue correction for
yellow.
For performing the hue correction
between yellow and red.
For switching ON/OFF of the 12-axis
independent color correction of the
position selected with the GAIN switch
(L, M, H).
LOW SETTING
Items/ Adjustable
Data Saved Range
MASTER –3dB Select the master gain from –3, 0, 3, 6,
GAIN : 9, 12, 15, 18, 21, 24, 27, or 30dB.
0dB
:
S C U F R 30dB
H.DTL LEVEL 00 For performing the horizontal detail
correction level setting.
:
10
:
S C U F R 63
For performing the vertical detail
V.DTL LEVEL 00
correction level setting.
:
20
:
31
S C U F R
DTL CORING 00 For performing the noise elimination
level setting for detail.
:
01
:
15
S C U F R
H.DTL FREQ. 00 For performing the horizontal detail
frequency selection.
:
18
:
S C U F R 31
LEVEL 0 For setting the LEVEL DEPEND.
When the Y-detail is emphasized, details
DEPEND. 1
of dark sections are compressed.
:
5
If the numerical value is larger, details of
bright sections are also compressed.
S C U F R
For setting the master gamma. (0.01
MASTER 0.30
step)
GAMMA :
0.45
:
0.75
S C U F R
BLACK –3 For setting the gamma curve for the dark
portion.
GAMMA :
OFF
–3 to –1:
:
The dark portion is compressed.
+3
OFF:
Standard state
+1 to +3:
The dark portion is extended.
S C U F R
For selecting the color correction table
MATRIX OFF
for the linear matrix.
TABLE A
B
S C U F R
For switching ON/OFF of the 12-axis
COLOR ON
independent color correction.
CORRECT OFF
S C U F R
Notes
The items indicated by
MENU SW( ) R/W in the <SD CARD R/W SELECT>
screen. The items without
PAINT MENU LEVEL R/W.
Please refer to [ SD CARD R/W SELECT ] (page 169) for
more information.
If images are shot when the master gain is set to –3dB,
some coloring phenomena may occur on images in very
bright sections. In order to suppress the coloring
phenomena, switch the OUTPUT AUTO KNEE switch to
"CAM AUTO KNEE OFF", set the MANUAL item on the
KNEE/LEVEL screen to "ON", and then set a smaller
value for the KNEE SLOPE item on the KNEE/LEVEL
screen. After executing these settings, confirm that there
are no coloring phenomena and then start shooting.
Remarks
are the setting items for PAINT
are the setting items for