Panasonic aj-HPX2000p Operating Instructions Manual page 144

DOWNCON SETTING
Items/ Adjustable
Data Saved Range
DOWNCON SQUEEZ
MODE LT-BOX
S-CROP
– C U F R
DETAIL ON
OFF
– C U F R
H.DTL LEVEL 00
:
08
:
31
– C U F R
V.DTL LEVEL 00
:
04
:
– C U F R 31
DTL CORING 00
01
:
15
– C U F R
H.DTL FREQ. 1
:
3
:
5
– C U F R
2D LPF ON
OFF
– C U F R
SETUP 0%
7.5%
（ Only for 1080-59.94i or 720-59.94P ）
– C U F R
◆ Note
The <DOWNCON SETTING> screen is displayed when
SYSTEM MODE is set to 1080-59.94i, 1080-50i, 720-
59.94P and 720-60P (HD mode).
144 Menu : Menu Description Tables
Remarks
For setting the mode of the down
converter output signals.
For setting the detail function for the
down converter output signals ON/OFF.
The down converter output signals
contain detailed components that are
set during HD signal processing. In this
setting, these signals overlap the
detailed components dedicated to the
down converter outputs.
Even if this setting is turned off, it is
impossible to turn off the detailed
components set during HD signal
processing.
For setting the horizontal detail
correction level for the down converter
output signals.
For setting the vertical detail correction
level for the down converter output
signals.
For setting the noise elimination level of
the details.
For selecting the horizontal detail
frequencies.
1: 2.5 MHz 4: 4 MHz
2: 3 MHz 5: 4.5 MHz
3: 3.5 MHZ
For setting the 2-D low path filter
reducing cross colors.
ON: Cross colors are reduced.
OFF: Cross colors are not reduced.
For setting the setup level for the down
converter output signals.
Note
When the system frequency is set to 50
Hz, the setup level will be 0%.
LCD MONITOR
Items/ Adjustable
Data Saved Range
BRIGHTNESS –7 Adjust the LCD monitor brightness.
:
+0
:
– C U F – +7
COLOR –7 Adjust the LCD monitor chroma level.
LEVEL :
+0
:
– C U F – +7
Adjust the LCD monitor contrast.
CONTRAST –7
:
+0
:
+7
– C U F –
BACKLIGHT NORMAL Adjust the backlight
NORMAL : Mode normally used
HIGH
HIGH:
– C U F –
SELF SHOOT NORMAL Select whether or not to change the
MIRROR LCD monitor to mirror image.
NORMAL: Do not change to mirror
MIRROR: Change to mirror image.
– C U F –
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
This is brighter than NORMAL
image.