Panasonic aj-HPX2000p Operating Instructions Manual page 177
Memory card camera-recorder
Hide thumbs
Also See for aj-HPX2000p:
- Parts list (25 pages) ,
- Operating instructions manual (194 pages)
Table of Contents
Advertisement
Input/output Unit
GEN LOCK IN:
BNC 1, 1.0 V
(This is available as VIDEO IN or the
return video input connector, which can
be switched in the menu.)
MON OUT:
BNC 1, 1.0 V
VIDEO OUT :
BNC 1, 1.0 V
(It can be switched among HD-SDI/SD-
SDI/Composite.)
HD-SDI:
SD-SDI:
Composite: 1.0 V
TC IN:
BNC 1, 0.5 V
TC OUT:
BNC 1, low impedance, 2.0 ± 0.5 V
DVCPRO/DV :
6 pins (I/O)
Transmission rate:
400, 200, or 100 Mbps (selectable)
Transmission data:
compliant with IEEE1394 - 1995/
1394a - 2000, IEC 61883-1 and 2,
and SMPTE 396M
Control commands:
compliant with the AV/C Command
Set standards.
SDI-IN :
BNC 1, 0.8 V
(HD/SD-SDI input board AJ-YA350G is
attached.)
HD: Compliant with the SMPTE292M/
296M/299M standards
SD: Compliant with the SMPTE259M-
C/272M-A/ITU-R.BT656-4
standards
Accessories
Shoulder Strap
Front Audio Level control knob
Control knob mounting screw 1
Weight and dimentions when shown are approximately.
Specifications are subject to change without notice.
-
, 75
P
P
-
, 75
P
P
-
, 75
P
P
0.8 V
-
, 75
P
P
(Compliant with the
SMPTE292M/296M/299M
standards)
0.8 V
-
, 75
P
P
(Compliant with the
SMPTE259M-C/272M-A/
ITU-R. BT656-4 standards)
-
, 75
P
P
-
to 8 V
-
, 10 k
P
P
P
P
-
P
P
-
, 75
P
P
AUDIO IN CH1/CH2:
XLR
2, 3 pins
LINE, MIC, and +48 V switch-selectable
LINE:
MIC:
MIC + 48V:
MIC IN:
XLR
1, 5 pins
+48 V phantom: ON/OFF selectable
with menu
–40 dBu
(–50 dBu/–40 dBu selectable with menu)
WIRELESS IN:
25 pin D-SUB, –40 dBu
AUDIO OUT CH1/CH2:
XLR
1, 5 pins, +4 dBu
(–3 dBu/0 dBu/+4 dBu selectable with menu)
Balanced low-impedance output
Headphones :
Stereo mini jack
DC IN:
XLR
1, 4 pins, DC 12 V (DC 11 V - 17 V)
DC OUT:
4 pins, DC 12 V (DC 11 V - 17 V)
Maximum rated current: 1.5 A
LENS:
12 pins
EVF:
20 pins
REMOTE:
10 pins (connector for AJ-RC10G)
GPS:
6 pins (connector for AJ-GPS900G)
USB :
HOST:
DEVICE: 4-pin, Type-B connector
+4 dBu
(–3 dBu/0 dBu/+4 dBu
selectable with menu)
–60 dBu (–60 dBu/–50 dBu
selectable with menu)
Compatible with +48V
phantom power supply
–60 dBu (–60 dBu/–50 dBu
selectable with menu)
2
4-pin, Type-A connector
compliant with USB version
2.0
compliant with USB version
2.0
Specifications
177
Advertisement
Table of Contents
