Panasonic aj-HPX2000p Operating Instructions Manual page 145

GENLOCK
Items/ Adjustable
Data Saved Range
GENLOCK INT Switch the camera synchronising signal.
EXT INT: Synchronise with the internal
reference signal regardless of the
reference signal input to the
GENLOCK IN connector.
EXT: Synchronise with the reference
signal input to the GENLOCK IN
– C U F R
connector.
GL PHASE HD SDI For selecting the output signals that lock
COMPOSIT phases to the signals that are input in
the GENLOCK IN connector. (Only for
1080-59.94i, 1080-50i, 720-59.94P, or
720-50P ）
HD SDI:
For locking the HD SDI signals to the
GENLOCK input.
For the down converter output
signals, the start position of the video
delays by about 90 lines.
COMPOSIT:
For locking the down converter output
signals to the GENLOCK input.
For the HD SDI output signals, the
start position of the video gains by
about 90 lines.
– C U F R
H PHASE –100 Perform coarse phase adjustment for
horizontal hold when configuring a
COARSE :
+000
system.
:
– – – – – +100
H PHASE –100 Perform fine phase adjustment for
horizontal hold when configuring a
FINE :
+000
system.
:
+100
– – – – –
Remarks
Data Saved
1394 AUDIO
OUT
– C U F –
1394 SPEED
– C U F –
1394 IN CH
– C U F –
1394 OUT CH 0
– C U F –
1394
CONTROL
– C U F –
1394 CMD SEL REC_P
– C U F –
The ____ in the Adjustable Range column indicates the
preset mode.
1394 SETTING
Items/ Adjustable
Range
CH1/CH2 For selecting the channels for audio
CH3/CH4 signals output from the DVCPRO/DV
connector when the camera-recorder is
operating in DVCPRO or DV mode (for
480-59.94i or 576-50i only)
Note
When CH3/CH4 is selected, no sound is
heard in the following outputs:
EE output if the 25M REC CH SEL
menu option on the MIC AUDIO
screen on the MAIN OPERATION
page is set to 2CH.
Output of playback data recorded as
2-channel audio signals.
S100 For setting the transfer rate of signals
output from the DVCPRO/DV connector.
S200
S400 S100:100Mbps
S200:200Mbps
S400:400Mbps
0 For setting the input channel of signals
input to the DVCPRO/DV connector.
:
0 - 63:
63
AUTO AUTO:
For setting the input channel of signals
: output from the DVCPRO/DV connector.
0 - 63:
63
AUTO:
AUTO
OFF For setting the control for recording
BOTH start/stop operations of external devices
that are connected to the DVCPRO/DV
connector.
OFF: Do not control the externally
connected devices.
BOTH:To control both the unit and the
externally connected devices
For setting the control of recording stop
STOP operations of the external devices that
are connected to the DVCPRO/DV
connector.
REC_P: Operation to pause recording
STOP:
Menu : Menu Description Tables
Remarks
To fix to the designated value
To follow the settings of the
externally connected devices
To fix to the designated value
To follow the settings of the
externally connected devices
Stopping operation
145