Panasonic aj-HPX2000p Operating Instructions Manual page 162

USER SW GAIN
Items/ Adjustable
Data Saved Range
S.GAIN
30 dB •
– C U F R
36 dB
•
– C U F R
42 dB
•
– C U F R
48 dB
•
– C U F R
DS.GAIN
•
6 dB
– C U F R
10 dB
•
– C U F R
12 dB
•
– C U F R
15 dB
•
– C U F R
20 dB
•
– C U F R
Note
When the DS.GAIN function is active, the shutter mode is
set to OFF.
162 Menu : Menu Description Tables
Remarks
Select whether or not to enable 30dB for
SUPER GAIN.
: Enable.
• : Disable.
Select whether or not to enable 36dB for
SUPER GAIN.
: Enable.
• : Disable.
Select whether or not to enable 42dB for
SUPER GAIN.
: Enable.
• : Disable.
Select whether or not to enable 48dB for
SUPER GAIN.
: Enable.
• : Disable.
Select whether or not to enable 6 dB
DS.GAIN.
: Enable.
• : Disable.
Select whether or not to enable 10 dB
for DS.GAIN.
: Enable.
• : Disable.
Select whether or not to enable 12 dB
for DS.GAIN.
: Enable.
• : Disable.
Select whether or not to enable 15 dB
for DS.GAIN.
: Enable.
• : Disable.
Select whether or not to enable 20 dB
for DS.GAIN.
: Enable.
• : Disable.
LENS/IRIS
Items/ Adjustable
Data Saved Range
A.IRIS LEVEL 000
:
045
:
– C U F R 100
A.IRIS PEAK/ 000
AVE :
030
:
100
– C U F R
A.IRIS NORM1
NORM2
WINDOW
CENTR
for
– C U F R
S.IRIS LEVEL 000
:
080
:
– C U F R 100
IRIS GAIN CAM
LENS
– C U F R
IRIS GAIN 01
VALUE :
10
:
20
– C U F R
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
Set the target value for auto iris.
Determine the peak-to-standard ratio for
the auto iris.
A larger value sets the auto iris to
respond to the peak in the IRIS
detection window, while a smaller value
sets it to respond to the average value in
the window.
Select the auto iris detection window.
NORM1: The window closer to the center
of the screen.
NORM2: The window closer to bottom of
the screen.
CENTR: The spot window in the center of
the screen.
Set the target value for the super iris
(Backlight correction function).
Select which unit controls IRIS GAIN.
Note
Lenses with an extender, such as
0.8 sold before FUJINON DIGI
POWER, perform IRIS compensation
while enabling the extender. Therefore, if
this setting is switched to CAM, the
camera's iris control will not operate
properly.
Set the adjustable value for IRIS GAIN.
This setting is effective when CAM is
selected for IRIS GAIN.
2,