Ipv6 Mld Snooping Querier Vlan Max-Response-Time - TP-Link TL-SG2216 Reference Manual

Syntax
ipv6 mld snooping querier vlan vlan-id
no ipv6 mld snooping querier vlan vlan-id
Parameter
vlan-id —— The VLAN that enables the MLD querier function, ranging from 1 to
4094.
Command Mode
Global Configuration Mode
Example
Enable MLD Querier function on VLAN 2:
TL-SG2424(config)# ipv6 mld snooping querier vlan 2

ipv6 mld snooping querier vlan max-response-time

Description
The ipv6 mld snooping querier vlan max-response-time command is used to
specify the max response time of the Query message. The default value is 10
seconds. To restore the default value, please use no ipv6 mld snooping
querier vlan max-response-time command.
Syntax
ipv6 mld snooping querier vlan vlan-id max-response-time time
no ipv6 mld snooping querier vlan vlan-id max-response-time
Parameter
vlan-id —— The VLAN that enables the MLD Querier function, ranging from 1 to
4094.
time —— Specify the time in seconds, ranging from 1 to 25.
Command Mode
Global Configuration Mode
Example
Specify the max response time as 10s on VLAN 2:
TL-SG2424(config)# ipv6 mld snooping querier vlan 2 max-response-time
10
177