Show Ipv6 Mld Snooping Static-Mcast; Show Ipv6 Mld Snooping Group; Show Ipv6 Mld Snooping Filter - TP-Link TL-SG2216 Reference Manual

show ipv6 mld snooping static-mcast

Description
The show ipv6 mld snooping static-mcast command is used to display the
static multicast groups configured by users.
Syntax
show ipv6 mld snooping static-mcast
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display static multicast groups:
TL-SG2424(config)# show ipv6 mld snooping static-mcast

show ipv6 mld snooping group

Description
The show ipv6 mld snooping group command is used to display multicast
groups.
Syntax
show ipv6 mld snooping group [ dynamic | static ][ vlan vlan-id ]
Parameter
dynamic —— Display dynamic groups.
static —— Display static groups.
vlan-id ——The VLAN ID selected to display, ranging from 1 to 4094.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display all of the multicast groups:
TL-SG2424(config)# show ipv6 mld snooping group

show ipv6 mld snooping filter

Description
The show ipv6 mld snooping filter command is used to display the filter
entries.
183