Using Hot Cues; Using Auto Beat Loops; Deleting Stored Cue Or Loop Points - Pioneer XDJ-RX Operating Instructions Manual

 Calling out stored cue or loop points
1 Connect the USB device to this unit.
2 Load the track whose cue or loop points you want to
call out.
Stored cue and loop points are indicated [b] at the top of the waveform
display.
3 Press the [CUE/LOOP CALL, c(LOOP 1/2X)] or
[CUE/LOOP CALL, d(LOOP 2X)] button.
Press [CUE/LOOP CALL, c(LOOP 1/2X)] to call out a point before the
currently playing position, [CUE/LOOP CALL, d(LOOP 2X)] to call out a
point after the currently playing position.
The track cues to the called out point and pauses.
! When multiple points are stored, a different point is called out each
time the button is pressed.
! Loops set as active loops can also be called out as stored loops.
! If the point called has a comment set to it with the help of rekordbox,
the comment is displayed in the area where the name of the track is
displayed.
! The set comment list can also be displayed in the track list on the
browse screen by pressing the rotary selector. Selecting a comment
from the displayed list and pressing the [LOAD c, d] button will call
the selected point out.
4 Press the [f (PLAY/PAUSE)] button.
Normal or loop playback starts from the point that was called out.

 Deleting stored cue or loop points

1 Connect the USB device to this unit.
2 Load the track containing the cue point or loop points
you want to delete.
Stored cue and loop points are indicated [b] at the top of the waveform
display.
3 Press the [CUE/LOOP CALL, c(LOOP 1/2X)] or
[CUE/LOOP CALL, d(LOOP 2X)] button to call out the
point to be deleted.
The track cues to the called out point and pauses.
! When multiple points are stored, a different point is called out each
time the button is pressed.
4 Press the [DELETE] button.
The main unit display shows [
information is deleted.
! When a stored loop set as an active loop is deleted, the active loop is
also deleted.

Using hot cues

When a hot cue is set, that point can be called out and played instanta-
neously. Up to 4 hot cues can be set per music track.
 Setting Hot Cue
1 Press the [HOT CUE/CALL] button to switch to the hot
cue mode.
2 During playback or while pausing, press one of the
Performance buttons at the point at which you want to
set the hot cue.
The point at which the button was pressed is set as the hot cue, and
the corresponding Performance button turns blue. Simultaneously, the
playback history is stored on the USB device.
! During loop playback, the loop is registered as a hot cue.
! The direction of playback is not recorded for hot cues.
! When a hot cue is set during scratch play, playback may stop
temporarily.
14
En
DELETED], and the selected point
! When the quantize function is on, there may be a slight delay in
operation of this function in order to synchronize the beat.
! A hot cue which has already been recorded in the Performance
button cannot be re-recorded. To store a new Hot Cue, first delete the
stored Hot Cue.
 Playing hot cues
During playback or while pausing, press one of the
Performance buttons.
The hot cue recorded at that button is called out and playback begins.
The information of the loop play stored in a Performance but-
ton is different from the loop playback set by using the
[LOOP IN/4BEAT (IN ADJUST)] or [LOOP OUT (OUT ADJUST)] buttons.
! After the loop stored in the Performance button is called out, you
can cancel the loop playback by using the [RELOOP/EXIT] but-
ton. You can also fine-tune the loop in point with the help of the
[LOOP IN/4BEAT (IN ADJUST)] button or the loop out point with the
help of the [LOOP OUT (OUT ADJUST)] button.
 Calling out hot cues
1 Connect the USB device to this unit.
2 Load the track whose hot cue you want to call out.
3 Press the [HOT CUE/CALL] button while in the Hot
Cue mode.
The unit switches to the hot cue call out mode and the Performance but-
tons where hot cues are stored flash.
4 Press the Performance button corresponding to the
Hot Cue to be called out.
The hot cue is called out and the Performance button turns blue.
! If you don't want to call out a hot cue, press [HOT CUE/CALL] with-
out pressing the Performance button. The light of button turns off
when hot cue is not called out.
! rekordbox can be preset so that hot cues are called out automatically
when tracks are loaded.
" " is displayed on the track list for tracks for which auto hot cue
loading is set.
 Deleting hot cues
Press one of the Performance buttons while keeping the
[SHIFT] button pressed.
The hot cue stored at the corresponding button is deleted, the button
turns off, and a new hot cue can now be stored at that button.

Using Auto Beat Loops

A loop with the specified number of beats is set based on the BPM and
the loop playback starts.
1 Switch to the Auto Beat Loop function by pressing
the [AUTO BEAT LOOP] button.
2 Press the Performance button corresponding to the
beats to want be set (1 beat, 2 beats, 4 beats, 8 beats).
From the playback position where the Performance button was pressed,
the loops corresponding to the number of beats set are automati-
cally set, after which loop playback starts. During loop playback, the
Performance button will flash.
! If the Performance button is pressed while keeping the [SHIFT] but-
ton pressed, you can specify the beats as 1/16 beats, 1/8 beats, 1/4
beats, 1/2 beats from the left edge.
! If the track's BPM cannot be detected, the BPM is set to 120.
 Canceling loop
To cancel a loop, either click the Performance button flashing when loop
playback is ON, or press [RELOOP/EXIT] button.