Pioneer XDJ-RX Operating Instructions Manual page 22

1 2 3
1List of contents The contents of the tag list are displayed here.
The name of the medium on which the track is recorded is
2Medium name
displayed here.
Part of the artwork registered in rekordbox is displayed here.
3Jacket photo When the [INFO] button is pressed, the jacket photo turns off
and serial numbers are displayed.
Turn the rotary selector to move the cursor up and down.
4Cursor
The categories displayed with rekordbox can be selected.
5User-set
When the [INFO] button is pressed, the details of the track
categories
selected with the cursor are displayed.
Adding tracks to the tag list
 Selecting tracks and adding them
1 Switch to the browse screen and display the list of
tracks.
2 Set the cursor to the track and press the [TAG TRACK/
REMOVE] button.
is displayed on the left side of the track, and the track is added to
the tag list of that USB device.
! Tracks can be recorded in the tag list ahead of time using rekordbox.
= For the operation, see the rekordbox (Mac/Windows) user's manual.
 Adding loaded tracks
1 Load a track.
2 At the normal playback screen, press the [INFO]
button.
3 Press the [TAG TRACK/REMOVE] button.
The track loaded in this unit is added to the tag list.
! Tracks can be added to the tag list by pressing the [TAG TRACK/
REMOVE] button at the normal playback screen as well.
! [DECK] of the track to be added can be selected by using the
[DECK1/2] button.
 Adding entire categories or folders
All the tracks in a selected category or folder can be added to the tag list.
1 Switch to the browse screen and select a category or
folder that has tracks directly under it.
A list of the tracks is displayed on the right half of the information display
screen.
2 Set the cursor to the category or folder, then press
the [TAG TRACK/REMOVE] button.
The category or folder name flashes, and all the tracks in that category or
folder are added to the tag list.
22
En
4 5
! When folders are added while in the folder browse mode, tracks for
which ID3 tags, etc., have not been loaded a single time are regis-
tered using the file name as the track name. The artist names are not
registered.
! After tracks have been added to the tag list, when the registered
tracks are displayed on the track list on the browse screen or are
loaded in a player and their ID3 tags, etc., are loaded, the file names
switch to the track names and the artist names are also registered.
 Adding tracks from playlists
All the tracks on a selected playlist can be added to the tag list.
1 Switch to the browse screen and select and enter the
[PLAYLIST] category.
A list of the playlists is displayed, and a list of the tracks is displayed on
the right half of the information display screen.
2 Set the cursor to the playlist, then press the
[TAG TRACK/REMOVE] button.
The playlist name flashes, and all the tracks on that playlist are added to
the tag list.
Loading tracks from the tag list
1 Press the [TAG LIST] button.
The tag list is displayed.
2 Use the rotary selector to select and enter [USB1] or
[USB2].
A tag list in the selected USB device is displayed.
3 Use the rotary selector to select and enter the track
you want to load.
! When the rotary selector is pressed while the cursor is set at a track,
track menu is displayed.
= Track menu (p. 21 )
! When the [LOAD c, d] button is pressed while the cursor is set to a
track, that track is loaded in the specified deck of the unit.
Removing tracks from the tag list
Tracks can be removed from tag lists.
 Removing one track at a time
1 Press the [TAG LIST] button.
The tag list is displayed.
2 Use the rotary selector to select and enter [USB1] or
[USB2].
A tag list in the selected USB device is displayed.
3 Use the rotary selector to set the cursor to the track
you want to remove.
4 Press the [TAG TRACK/REMOVE] button for over 1
second.
Tracks can be removed from tag lists by pressing the [TAG TRACK/
REMOVE] button at the screens and in the situations described below.
! When the cursor is set to a track registered in the tag list on the
browse screen
! When the normal playback screen or a track's details screen is
displayed while a track registered in the tag list is loaded
 Removing all the tracks
1 Press the [TAG LIST] button.
The tag list is displayed.
2 Use the rotary selector to select and enter [USB1] or
[USB2].
A tag list in the selected USB device is displayed.