Making/Answering Calls Using The Base Unit; Making Cellular Calls; Making Landline Calls - Panasonic KX-TGF372 Operating Instructions Manual

Making cellular calls

Important:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 15).
1
Dial the phone number.
R To correct a digit, press MCLEARN.
2
Press MCELL 1N or MCELL 2N.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– With the call sharing mode on
(page 46), press MCELLN
handset. a MbN: Select the desired
cellular phone. a MSELECTN a Press
MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
Adjusting the speaker volume
Press MDN or MCN repeatedly while talking.
Note:
R The speaker volume you set is kept for
each line (landline and cellular lines).
Making a cellular call using the redial
list
The last 10 phone numbers dialed are stored
in the redial list (each 48 digits max.).
1
MREDIALN
For assistance, please visit www.panasonic.com/support
TGF37x(en)_1128_ver032.pdf

Making/Answering Calls Using the Base Unit

2
3
Erasing a number in the redial list
1
2
3
4

Making landline calls

1
2
3
4
Note:
R While on a call, you can switch from the
*1
on the
Making a call using the redial list
The last 10 phone numbers dialed are stored
in the redial list (each 48 digits max.).
1
2
3
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 38).
27
MbN: Select the desired phone number.
Press MCELL 1N or MCELL 2N.
MREDIALN
MbN: Select the desired phone number.
a MERASEN
MbN: "Yes" a MSELECTN
MEXITN
Dial the phone number.
R To correct a digit, press MCLEARN.
MZN
When the other party answers, speak into
the microphone.
When you finish talking, press MZN.
base unit to the handset:
– Press M N on the handset, then press
MZN on the base unit with the call
sharing mode on (page 46).
– If the handset is on the base unit, simply
lift it.
MREDIALN
MbN: Select the desired phone number.
MZN
2014/11/28 16:08:40
27