Making/Answering Calls Using The Base Unit; Making Cellular Calls; Making Landline Calls; Answering Calls - Panasonic KX-TG7733S Operating Instructions Manual

Making cellular calls

Available for:
KX-TG7741 series (page 3)
1
Press MCELL 1N or MCELL 2N.
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
R Speak alternately with the other party.
4
When you finish talking, press
MSP-PHONEN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from the
base unit to the handset:
With the call sharing mode on (page 29),
press MCELLN on the handset. a MbN:
Select the desired cellular phone. a
MSELECTN a Press MSP-PHONEN on the
base unit.
– When only 1 cellular phone is registered
or the line is set to make cellular calls
(page 20), press MCELLN on the
handset, then press MSP-PHONEN on
the base unit.
If the handset is on the base unit, simply lift
it.
Adjusting the speaker volume
Press MjN or MkN repeatedly while talking.
Redialing the last number dialed
1
Press MCELL 1N or MCELL 2N.
2
MREDIALN

Making landline calls

1
MSP-PHONEN
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
For assistance, please visit http://www.panasonic.com/help

Making/Answering Calls Using the Base Unit

4
When you finish talking, press
MSP-PHONEN.
Note:
R While on a call, you can switch from the
base unit to the handset:
Press M
MSP-PHONEN on the base unit with the call
sharing mode on (page 29).
If the handset is on the base unit, simply lift
it.
Redialing the last number dialed
MSP-PHONEN a MREDIALN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 32).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
MSP-PHONEN
2
9 a MPAUSEN
3
Dial the phone number.
Note:
R A 3.5 second pause is inserted each time
MPAUSEN is pressed.

Answering calls

When a call is being received, the SP-PHONE
indicator flashes rapidly.
When a cellular call is being received, the
CELL 1 or CELL 2 indicator and SP-PHONE
indicator flash rapidly.
1
Press MSP-PHONEN when the unit rings.
R You can also answer the cellular call
2
Speak into the microphone.
3
When you finish talking, press
MSP-PHONEN.
N on the handset, then press
by pressing MCELL 1N or MCELL 2N.
27