Panasonic KX-TGF372 Operating Instructions Manual page 52

Programming
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1
MMENUN#268
2
MbN: "On" a MSELECTN
3
MbN: Select "Outgoing call" to
monitor from an outside line. a
MEDITN a MADDN
4
MbN: "Manual" a MSELECTN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN
a MSELECTN
R "Baby monitor" will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to "On".
Handset
1
Press MMENUN on the handset being
monitored.
2
MbN: "On/Off" a MSELECTN
3
MbN: "Off" a MSELECTN a MOFFN
Editing an outside monitoring number
Handset
1
Press MMENUN on the handset being
monitored.
2
MbN: "On/Off" a MSELECTN
3
MbN: "On" a MSELECTN
4
MbN: Select the outside line. a MEDITN
5
MMENUN a MbN: "Edit" a MSELECTN
6
Edit the name if necessary. a MOKN
7
Edit the phone number if necessary. a
MOKN a MSELECTN
For assistance, please visit www.panasonic.com/support
52
TGF37x(en)_1128_ver032.pdf
Erasing an outside monitoring
number
1
2
3
4
5
6
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
1
2
3
Answering the baby monitor
n When monitoring with a unit:
52
Handset
Press MMENUN on the handset being
monitored.
MbN: "On/Off" a MSELECTN
MbN: "On" a MSELECTN
MbN: Select the outside line. a MEDITN
MMENUN a MbN: "Erase" a MSELECTN
MbN: "Yes" a MSELECTN a MOFFN
monitoring call.
Handset
Press MMENUN on the handset being
monitored.
MbN: "Sensitivity level" a
MSELECTN
MbN: Select the desired setting. a
MSAVEN a MOFFN
Handset: Press M N to answer a call.
Base unit: Press MZN to answer a call.
If you want to respond from the monitoring
unit, press MMUTEN.
R The monitoring unit will answer calls
automatically when the auto intercom
feature is set to "On" (page 31).
Note:
R If you receive an outside call when
communicating with the monitored
handset, the interrupt tone sounds.
– To answer the call with the handset,
press MOFFN, then press M
2014/11/28 16:08:42
N.