Error Messages - Panasonic KX-TGF372 Operating Instructions Manual

Kx-tgf370 series
Hide thumbs Also See for KX-TGF372:
Table of Contents

Advertisement

Useful Information

Error messages

Display message
Ask phone
company for
VM access #
Base no power
or
No link. Re-
connect base
AC adaptor.
or
No link.
Busy
Check tel line
Error!!
Failed
For assistance, please visit www.panasonic.com/support
72
TGF37x(en)_1128_ver032.pdf
Cause/solution
R You have not stored the voicemail access number.
Store the number (page 69).
R Confirm the base unit's AC adaptor is connected to
the unit and the power outlet correctly.
R The handset has lost communication with the base
unit. Move closer to the base unit and try again.
R Unplug the base unit's AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset's registration may have been canceled.
Re-register the handset (page 53).
R When "No link." is displayed during a power
failure, place a handset on the base unit to supply
power to the base unit.
R No cellular phone is paired to the base unit. Pair a
cellular phone (page 17).
R The called unit is in use.
R Other units are in use and the system is busy. Try
again later.
R The handset you are using is too far from the base
unit. Move closer and try again.
R Only 2 Bluetooth devices can be used with the unit at
the same time (for example, 2 cellular lines, or the
headset and 1 cellular line).
R The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 11).
R If you do not connect the telephone line cord and use
only cellular lines, set the cellular line only mode
(page 19).
R Recording was too short. Try again.
R Someone is using a cellular line or headset. Try
again later.
R The phonebook copy is incomplete (page 57). The
cellular phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.
R Although the unit tried to connect to the cellular
phone or headset, the connection has been failed.
– Someone is using a cellular line or headset. Try
again later.
– Make sure that the cellular phone or headset is
not connected to other Bluetooth devices.
72
2014/11/28
16:08:43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents