Panasonic KX-TGF372 Operating Instructions Manual page 23

Note:
R To change the flash time, see page 46.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed after you hear
the call waiting tone on the handset.
1
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press * (TONE) before entering access
numbers which require tone dialing.
Handset clarity booster
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
R When this feature is turned on,
displayed. However, during a cellular call,
is not displayed even though the
feature is activated.
For assistance, please visit www.panasonic.com/support
TGF37x(en)_1128_ver032.pdf
Making/Answering Calls Using the Handset
Handset noise reduction
This feature allows you to hear the voice of
the person you are talking to more clearly, by
reducing the surrounding noise coming from
the other party's telephone.
1
2
Note:
R The setting you made is kept for each line
R Depending on the environment where this
R This feature is not available while using the
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1
2
3
4
Note:
R The setting you made is kept for each line
R Depending on the condition and quality of
is
R This feature is not available while using the
R When both the "Equalizer" setting and
23
Press MMENUN while talking.
MbN: "Noise reduction on" or
"Noise reduction off" a
MSELECTN
(landline and cellular lines).
The default settings are as follows:
– for landline: "Noise reduction off"
– for cellular lines: "Noise reduction
on"
handset is being used, this feature may not
be effective.
speakerphone.
Press MMENUN while talking.
MbN: "Equalizer" a MSELECTN
MbN: Select the desired setting.
Press MOKN to exit.
(landline and cellular lines).
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
speakerphone.
noise reduction are activated,
shown on the display.
2014/11/28 16:08:40
is
23