Answering Calls; Useful Features During A Call - Panasonic KX-TGF372 Operating Instructions Manual

Making/Answering Calls Using the Handset
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
M N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 38).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
9 a MDN (Pause)
2
Dial the phone number. a M
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.

Answering calls

1
Lift the handset and press M
when the unit rings.
R To answer a cellular call, you can also
press MCELLN.
2
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 45).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
Adjusting the handset ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
For assistance, please visit www.panasonic.com/support
22
TGF37x(en)_1128_ver032.pdf
Note:
R The ringer volume you set is kept for each
Useful features during a
call
Hold
1
2
3
N
N or MZN
Note:
R After holding for 10 minutes, the call is
Mute
1
2
Note:
R MMUTEN is a soft key visible on the display
N.
Flash for landline calls
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
22
line (landline and cellular lines).
Press MMENUN during an outside call.
MbN: "Hold" a MSELECTN
To release hold on the cellular line:
*1
Press MCELLN.
R Another handset user can take the call
*1
by pressing MCELLN.
*1 If you press MCELLN and the
selection list is displayed, select
the desired cellular line and press
MSELECTN.
R The base unit user can take the call by
pressing MCELL 1N or MCELL 2N.
To release hold on the landline:
Press M N.
R Another handset user can take the call
by pressing M N.
R The base unit user can take the call by
pressing MZN.
disconnected.
Press MMUTEN during a call.
To return to the call, press MMUTEN.
during a call.
2014/11/28 16:08:40